RIFLECX CLP OIL - 100 ml

Why do I need CLP oil?

• In short – for the smooth operation of the pistol and to reduce wear. CLP oil is applied after using cleaning and maintenance fluid.
• Its thick consistency and special chemical composition (it does not attract 'stains') ensure the smooth operation of the weapon.
• The oil should be applied to moving parts – first on the rails and trigger mechanism.
• It is also worth lubricating the pistol barrel – it will not rub against the bolt and we will prevent scratches.
• A little is enough – do not pour large amounts on the pistol, Riflecx oil is not needed.
• It will reduce friction and protect our equipment from water, acids, or alkalis.
• It lasts a very long time, so you can be sure that your weapon will operate reliably.
• The oil firmly and permanently adheres to the surface and provides resistance to wear, pressure, high pressure, and temperature.
• It is safe for wood.

Instructions for use:
Apply the oil to moving surfaces to protect the surface and reduce friction – also on parts exposed to high temperatures: up to 250 °C. The oil protects weapon parts from water, acids, and alkalis. It works for a very long time on moving and rotating surfaces. The oil protects the surface from the adhesion of combustion products of gunpowder and other contaminants.

Properties:

• Provides high wear protection, protects components from micropitting, i.e., surface fatigue of the material.
• Creates a barrier against aggressive action of water or corrosive gases. Increases resistance to oxidation of components. Provides thermo-oxidative stability – long-lasting protection against corrosion and oxidation of lubricated surfaces.
• Volume: 100 ml.
• Application tip.
• Works at temperatures up to 250 °C.